Usb Bootable El Capitan

Use Terminal to Create the El Capitan Bootable USB Installer. Follow these steps to create a bootable USB installer of El Capitan in Terminal. Connect the USB flash drive to your Mac. Give the flash drive an appropriate name. You can do this by double-clicking the device's name on the desktop and then typing a new name. Finally, I could boot up the Mac while holding 'option/alt' and my USB drive appeared as a bootable device! 17 minutes later I can startup OSX! I may go ahead and re-download the installer and create a new bootable USB using 'createinstallmedia', just in case there was a problem with the image I used, but at least now I can boot up the computer! Library Preferences SystemConfiguration com.apple.Boot.plist System System Library System Library CoreServices System Library CoreServices boot.efi Install OS X El Capitan.app. This is all that is needed to boot the USB drive. The UEFI firmware doesn’t require any MBR tinkering to boot a usb drive, because there is no MBR. Step 6: Terminal and the Mac will now set about going through the process of installing the OS X El Capitan installer onto the connected USB flash drive and then turn it into a bootable drive. As mentioned above in the ‘Prerequisites’ section, this could take approximately 15-20 minutes to complete. How To Make El Capitan Bootable Usb From Dmg Windows 7. Sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia -volume /Volumes/Untitled -applicationpath /Applications/Install OS X El Capitan.app -nointeraction. In our case 'Untitled' is the name of USB flash drive! Replace 'Untilled' by name of your flash drive. Wait a few minutes and your El.


It does not matter whether you use macOS or Windows 10. It’s just a matter of time until your device will refuse to start, which could happen for many reasons, including (and not limited to) file corruption, hardware failure, and buggy update. If the unexpected happens with an Apple computer, you can use a macOS bootable USB with the installation media to repair it.

This is one of the main reasons you should consider making a macOS bootable USB when your device is working properly. However, if none of your devices (MacBook, MacBook Air, MacBook Pro, iMac, Mac Pro, or Mac Mini) aren’t working when you need them the most, then you can use a PC to rescue your Apple device. You can use a Windows 10, Windows 8.1, or Windows 7 device to quickly create a USB bootable installation media to reinstall macOS Catalina or Big Sur on your Mac.

Download: OS X El Capitan This will be downloaded as a disk image named InstallMacOSX.dmg. On a Mac that is compatible with El Capitan, open the disk image and run the installer within, named InstallMacOSX.pkg. It will install an app named Install OS X El Capitan into your Applications folder. If you have problems creating the bootable media, you can get a USB flash drive that comes with macOS Sierra, El Capitan, Catalina, etc., on it with the link mentioned below. (I haven’t tried it personally, but it’s worth the try if nothing works.).

In this guide, you’ll learn the steps to create a macOS Catalina bootable USB installation on Windows 10, which you can use to reinstall or upgrade the Apple OS.

Capitan

Requirements

Before proceeding, you’ll need the following:

  • Broken Mac computer running macOS (version 10.12, 11, or later).
  • A trial copy of the TransMac software.
  • One high-quality USB flash drive with 16GB of storage.
  • Copy of macOS (DMG file).

Create macOS bootable USB installation media

To create a bootable USB drive with macOS, use these steps:

  1. Download and install TransMac on the Windows 10 device.

    Quick note: This is a paid software, but it gives you a 15-day trial, which is more than enough time. (If this works for you and you want to support the developer, you can purchase the full version.)

  2. Connect the USB flash drive. (If you have any data on the flash drive, remember to make a backup, as everything on it will be erased.)

  3. Right-click the TransMac app and select the Run as administrator option.

  4. Click the Run button. (If you’re using the trial version, wait 15 seconds.)

  5. Right-click the USB flash drive, select the Format Disk for Mac option from the left navigation pane.

    Quick note: You want to do this before creating the bootable media because there is a good chance that the drive was formatted using a Windows device. If this is the case, the chances are that it’s using an MBR partition, and the USB drive needs a GPT partition to work on a Mac.

  6. Click the Yes button to format the drive on the warning message.

  7. Confirm a name for the drive. For example, “macOS bootable USB.”

  8. Click the OK button.

  9. Click the Yes button.

  10. Click the OK button.

  11. Right-click the USB flash drive and select the Restore with Disk Image option from the left navigation pane.

  12. Click the Yes button to confirm the erase of the USB flash drive data.

  13. Click the browse button on the right.

  14. Select the .dmg file with the macOS installation files.

  15. Click the Open button.

  16. Click the OK button.

  17. Click the Yes button.

Once you complete the steps, you can now insert the USB flash drive on your Mac computer to install, reinstall, or upgrade the operating system to the latest macOS version, which can be Sierra, Catalina, Big Sur, or higher.

Create a GPT partition on USB flash drive

If the USB flash drive is not working with TransMac, it could still be a partition problem. In this case, you may need to redo the entire process again. However, this time you should use the following steps to use the Diskpart command-line utility on Windows 10 to create the appropriate GPT partition, and then follow the above instructions.

To create a GPT partition on a removable drive, use these steps:

Bootable Usb El Capitan Disk Utility

  1. Open Start.

  2. Search for Command Prompt, right-click the top result, and select the Run as an administrator option.

  3. Type the diskpart command and press Enter.

  4. Enter the list disk command to view all drives connected to your computer and press Enter.

  5. Type the select disk command followed the number assigned for the USB flash drive (for example, select disk 4), and press Enter.

  6. Enter the clean command and press Enter.

  7. Type the convert GPT command and press Enter.

  8. Enter the create partition primary command and press Enter to complete the process.

Once you formatted the USB flash drive with a GPT partition, you can use the instructions mentioned above to use TransMac to create a bootable media, but this time skip steps No. 5 through 10 and continue on step 11.

Transmac Bootable Usb El Capitan

After the process completes, which can take up to an hour, connect the USB flash drive and power on your Mac holding down the Option key, select the USB drive to begin installing macOS.

Make Usb Bootable El Capitan

If you have problems creating the bootable media, you can get a USB flash drive that comes with macOS Sierra, El Capitan, Catalina, etc., on it with the link mentioned below. (I haven’t tried it personally, but it’s worth the try if nothing works.)

Usb Bootable El Capitan


I'm a bit confused by your post on what you are trying to do here. Are you trying to boot into Recovery Mode to install macOS to an external USB drive or are you trying to boot from a macOS USB installer to install macOS to the internal drive?


Here are the instructions for creating a bootable macOS USB installer:


Make sure to carefully read the section regarding macOS 10.11 as there are extra steps required to extract the real installer from the downloaded .dmg archive to the Applications folder. After running the .pkg file from the mounted .dmg file you can then proceed to use the command line to create the bootable macOS USB installer itself.


Make El Capitan Bootable Usb

Macs are very picky about the drives used for booting a Mac plus the quality of many USB sticks is extremely poor so try using another USB stick especially a different brand.


When erasing the drive make sure to select the whole physical drive within Disk Utility and erase the physical drive as GUID partition and MacOS Extended (Journaled). The physical drive should be the top most item which is usually identified by the make & model of the drive itself.

El Capitan Bootable Usb From Windows


Bootable Usb El Capitan Not Working

Aug 21, 2021 12:52 PM

Comments are closed.